INFORMATION FOR SPECIFIERS | Conical wooden pole |
Glue-lamellated larch wood | |
Height : 5m, 7m, 8m and 9m | |
Height 5m : Ø for base : 140 mm, Ø for top : 140 mm | |
Height 7 m : Ø for base : 194 mm, Ø for top : 150 mm | |
Height 8 et 9 m : Ø for base : 219 mm, Ø for top : 150 mm | |
Galvanised steel tubular base : 1m50 | |
Inspection door for electrical connection | |
Stuff aluminium bracket with decorative spigot, outreach 500 mm, 1000 mm and 1500 mm | |
MOUNTING INTERFACE | Height 5m : Fastening by 4 anchor bolts JT 16/14 x 300mm with fixing centres 200 x 200mm |
Height 7m, 8m, 9m : Fastening by 4 anchor bolts JT 20/18 x 400mm with fixing centres 300 x 300mm | |
MECHANICAL INTERFACE | Swivel joint lateral mounting |
Bracket top mounting on the pole | |
Fastening plate mouting for back lighting | |
CHART |
Environmental advantages
Glue-lamellated wood uses species grown in managed European forests. Its rational management ensures forest resources are reconstituted.
Growing 1kg of wood in a developing forest absorbs 1.5 kg of CO2 and produces 1kg of oxygen.
The environmental impact relating to the use of glues is reduced by the use of decantation techniques and biological treatment.
Manufacturing technique
ECLATEC uses larch wood, a species grown in managed forests. This species is particularly suited to the production of glue-lamellated poles.
Shaft production involves several stages:
- Logs cut into square edged planks.
- Hygroscopic and thermal stabilisation.
- Machining of the joints, abutting and gluing to constitute the laminated strips.
- Assembly of the strips to constitute a beam with the dimensional and mechanical properties required.
- After the glue has set, the shaft is planed and turned before applying the varnish.
Finishing treatment
- Sealing varnish with an acrylate dispersion base and alkyd resins.
Three-coat application.
Decorative satin finish.
- Aqueous phase impregnation, solvent-free.
Three-coat application.
Non-film forming.